GDW660V
Protect operations from costly outages with the Pramac GDW660V. Rated at 599.7 kVA prime and 660.3 kVA standby, it is designed for commercial standby, industrial backup and site power. The set can be matched to the real load, motor-starting demands and operating environment rather than selected on nameplate size alone.
The Volvo TAD1642GE engine and Mecc Alte ECO40 2L4 C alternator form a well-matched mechanical and electrical package for long-term standby or prime-power service. Integrate it with automatic transfer switching, remote monitoring, distribution and site fuel systems to create a complete power solution.
Order the standard package or specify a custom build with a stainless-steel canopy, hot-dip galvanised skid base, super-silent enclosure, synchronising controls or an open generator set. Talk to Capital Power Systems about generator sizing, transfer switching, fuel autonomy, acoustic treatment and a complete turnkey installation.
- 400/230 V, 50 Hz, three-phase output at 0.8 power factor
- 660.3 kVA / 528.2 kW ESP and 599.7 kVA / 479.8 kW PRP rating
- Volvo TAD1642GE 1500 rpm water-cooled diesel engine
- Mecc Alte ECO40 2L4 C alternator, IP23, Class H insulation
- 75% PRP fuel consumption: 90.39 L/hr
- Noise pressure: 75 dB(A) canopy @ 7 m
- 72 dB(A) Extra silent (Custom Order) @ 7 m
Industry-leading components, fully supported in Australia
Pramac
Pramac is a leading global manufacturer of stationary and mobile power generation equipment, founded in Tuscany, Italy in 1966. Now part of the Generac group, Pramac engineers diesel, petrol and battery energy storage solutions trusted by rental houses, mining sites and emergency services in over 150 countries.
Deep Sea Electronics
Deep Sea Electronics (DSE) has been designing intelligent generator and battery management controllers from Hunmanby, UK since 1975. Their controllers — including the iconic DSE 4520, 6020 and 7320 series — set the global standard for AMF / ATS automation, remote monitoring and over-current protection.
Volvo — Engine
Volvo Penta is the industrial engine division of the Volvo Group, headquartered in Gothenburg, Sweden. Volvo Penta TAD and TWD series engines are specified on Pramac's mid-to-large industrial gensets, known for outstanding fuel economy, low emissions, and exceptional cold-start performance — backed by Volvo's global parts and service network.
Mecc Alte — Alternator
Mecc Alte is the world's largest independent alternator manufacturer, headquartered in Vicenza, Italy since 1947. Their brushless synchronous alternators are renowned for exceptional voltage regulation, high efficiency and long service life — the engineering backbone of countless premium gensets.
- Model
- GDW660V/FS2
- Item number
- BT601TWA008
- Available configurations
- GDW660V+MFT-M - BT601TWA008 (2300 L)
- Prime / PRP output
- 599.7 kVA / 479.8 kW
- Phase
- Three-phase
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Power factor
- 0.8
- Electrical
- 24 V battery; | max current 953 A; | nominal current 866 A; | circuit breaker 1000 A
- Fuel
- Diesel
- Fuel Tank Size
- MFT-M 2300 L
- Fuel tank options
- MFT-M 2300 L
- Fuel Consumption @ 75% Load
- 90.39 L/hr
- Dimensions/weight
- Canopy: 4500 x 1590 x 2347 mm, 5149 kg; | Extra silent (Custom Order): 6100 x 1590 x 2347 mm, 5566 kg
- Noise @ 7m
- 75 dB(A) canopy @ 7 m; | 72 dB(A) Extra silent (Custom Order) @ 7 m
- Engine
- Volvo TAD1642GE
- Engine speed
- 1500 rpm
- Engine cooling
- Water
- Engine cylinders/displacement
- 6 in line; | 16120 cm³
- Aspiration
- Turbocharged
- Governor
- Electronic
- Gross engine power
- 565 kWm ESP; | 514 kWm PRP
- Emissions level
- Stage II
- Alternator
- Mecc Alte ECO40 2L4 C
- Alternator rating
- 675 kVA standby @ 27°C; | 625 kVA continuous @ 40°C
- Alternator efficiency
- 95% @ 100% load
- Alternator voltage tolerance
- 0.5%
- IP protection
- IP23
- Standby / LTP output
- 660.3 kVA / 528.2 kW
- Runtime @75% load
- MFT-M (2300 L) 25.45 h
- Fuel consumption @100% load
- 118.11 L/hr
- Canopy
- Sound-attenuated, traffic white RAL9016
- Cooling/airflow
- 639 m³/min
Learn more — Generator School
All guides →
Almost every conversation about generator sizing starts with two numbers: kVA and kW. They sound similar, they're closely related, and they're almost always mis-used. The beer-glass analogy below is the fastest way to get them straight in your head — and once you do, every spec sheet in the catalogue suddenly makes sense.
A generator is really three machines bolted together: an engine, an alternator, and a controller. They each do one job, and they all have to talk to each other for the unit to behave properly.
Almost every customer who asks us 'should I get diesel or petrol?' gets the same answer: it depends on the duty. For occasional camp / weekend use under 8 kVA, petrol is cheaper to buy and lighter to move. For anything that has to start reliably after sitting unused — backup, standby, prime-power — diesel wins, almost always.